|
|
|
National Stock Number:
5905-00-943-8287
Federal Supply Class:
5905
National Item Identification Number:
009438287
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 112755 | 24930 | L3HARRIS TECHNOLOGIES, INC | | 411-8972 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | KC20-01/8025 | 04454 | SENSOR SYSTEMS, L.L.C. | | 46335B | 10112 | GENERAL DYNAMICS MOTION CONTROL LLC |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 22.0 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION | | BEARING TYPE | BEARING SHAFT | | BODY DIAMETER | 2.000 INCHES NOMINAL | | BODY LENGTH | 0.865 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FEATURES PROVIDED | HUMIDITY PROOF | | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION | | FRAGILITY FACTOR | MODERATELY RUGGED | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION 360 DEG SINE-COSINE | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE CONFORMITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 SINGLE SECTION | | MAXIMUM RUNNING TORQUE | 2.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.0500 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM | | MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING | | PILOT DIAMETER | 1.8750 INCHES NOMINAL | | PILOT LENGTH | 0.0300 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT LENGTH | 0.750 INCHES NOMINAL | | SHAFT RADIAL PLAY | 0.003 INCHES | | SHAFT STYLE | ROUND | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 30.0 SINGLE SECTION | | TAP LOCATION TOLERANCE PER SECTION | -1.0 TO 1.0 DEG ANGULAR ROTATION SINGLE SECTION | | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 6 TURRET | | TEST DATA DOCUMENT | 24930-112755 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT DIAMETER | 1.875 INCHES NOMINAL | | UNDERCUT WIDTH | 0.0600 INCHES MINIMUM |
|
|