| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3780.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 50.0 KILOHMS SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION |
| ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| BEARING TYPE | BEARING SHAFT |
| BODY DIAMETER | 2.000 INCHES NOMINAL |
| BODY LENGTH | 2.125 INCHES NOMINAL |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.15 TO 0.15 SINGLE SECTION |
| LATERAL RUNOUT | 0.001 INCHES |
| MAXIMUM RUNNING TORQUE | 0.90 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 1.30 INCH-OUNCES |
| MAXIMUM STOP TORQUE | 600.00 INCH-OUNCES |
| MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.000 INCHES NOMINAL |
| MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 1.8750 INCHES NOMINAL |
| MOUNTING METHOD | CLAMP RING |
| PILOT DIAMETER | 1.8750 INCHES NOMINAL |
| PILOT LENGTH | 0.0930 INCHES NOMINAL |
| PILOT DIAMETER RUNOUT | 0.001 INCHES |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 5.0 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT LENGTH | 0.938 INCHES NOMINAL |
| SHAFT RADIAL PLAY | 0.001 INCHES |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT END PLAY | 0.005 INCHES |
| SHAFT STYLE | ROUND |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 25000.0 SINGLE SECTION |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 4 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 25500-501A080-801-107 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNDERCUT DIAMETER | 1.812 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |