| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 1080.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 35.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION |
| ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 66.0 |
| ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| BEARING TYPE | ROLLER SHAFT |
| BODY DIAMETER | 0.875 INCHES NOMINAL |
| BODY LENGTH | 1.065 INCHES MINIMUM AND 1.085 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FIRST FLAT LENGTH | 0.125 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| FLAT HEIGHT | 0.122 INCHES MINIMUM AND 0.127 INCHES MAXIMUM |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10 TO 0.10 SINGLE SECTION |
| LATERAL RUNOUT | 0.002 INCHES |
| OVERALL DIAMETER | 1.047 INCHES NOMINAL |
| MAXIMUM RUNNING TORQUE | 0.50 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 0.50 INCH-OUNCES |
| MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.625 INCHES NOMINAL |
| MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL |
| MOUNTING METHOD | CLAMP RING |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PILOT DIAMETER RUNOUT | 0.002 INCHES |
| PILOT DIAMETER | 0.6245 INCHES NOMINAL |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 1080.0 NOMINAL |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT RADIAL PLAY | 0.002 INCHES |
| SHAFT RUNOUT | 0.002 INCHES |
| SHAFT END PLAY | 0.005 INCHES |
| SHAFT LENGTH | 0.312 INCHES NOMINAL |
| SHAFT STYLE | ROUND, FLATTED |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 3 SOLDER STUD |
| UNDERCUT DIAMETER | 0.625 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0680 INCHES NOMINAL |