|
|
|
National Stock Number:
5905-00-950-1414
Federal Supply Class:
5905
National Item Identification Number:
009501414
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 20031 | 10112 | GENERAL DYNAMICS MOTION CONTROL LLC | | 751000 | 80045 | L3HARRIS CINCINNATI ELECTRONICS CORPORATION |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS 1ST SECTION | | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS 2ND SECTION | | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS 3RD SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 ALL SECTIONS | | BODY DIAMETER | 0.875 INCHES NOMINAL | | BODY LENGTH | 1.385 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR | | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 2ND SECTION | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 3RD SECTION | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -2.00 TO 2.00 1ST SECTION | | MOUNTING LIP DEPTH | 0.0600 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 0.7500 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING | | PILOT LENGTH | 0.0600 INCHES NOMINAL | | PILOT DIAMETER | 0.7500 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.25 FREE AIR ALL SECTIONS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS | | SECTION QUANTITY | 3 | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT LENGTH | 2.625 INCHES NOMINAL | | SHAFT STYLE | ROUND | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 9 THREADED STUD | | UNDERCUT DIAMETER | 0.875 INCHES NOMINAL | | UNDERCUT WIDTH | 0.0400 INCHES NOMINAL |
|
|