|
|
|
National Stock Number:
5905-00-959-2935
Federal Supply Class:
5905
National Item Identification Number:
009592935
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 199-10K | 91637 | VISHAY DALE ELECTRONICS, LLC | | X900401-1 | 05257 | GENERAL DYNAMICS LAND SYSTEMS - CANADA CORPORATION |
|
Techincal Specification:
| MOUNTING FACILITY QUANTITY | 2 | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 9000.0 MAXIMUM | | OVERALL LENGTH | 1.310 INCHES NOMINAL | | SECTION QUANTITY | 1 | | SHAFT STYLE | ROUND, SLOTTED | | MOUNTING HOLE DIAMETER | 0.087 INCHES MINIMUM | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | OVERALL WIDTH | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG | | ACTUATOR TYPE | SINGLE SHAFT | | OVERALL HEIGHT | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 135.0 SINGLE SECTION | | SHAFT DIAMETER | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM | | BODY HEIGHT | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM | | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 10.0 | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | BODY WIDTH | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 MAXIMUM | | BODY LENGTH | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM | | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | | TERMINAL LOCATION | REAR END | | MAXIMUM STARTING TORQUE | 7.00 INCH-OUNCES | | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION | | TEST DATA DOCUMENT | 05257-X900401 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | MOUNTING METHOD | UNTHREADED HOLE | | SHAFT LENGTH | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.8 FREE AIR SINGLE SECTION |
|
|