5905-00-984-4828, RESISTOR,VARIABLE,WIRE WOUND,NON

5905-00-984-4832 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-00-984-4828

Federal Supply Class:
5905

National Item Identification Number:
009844828

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

236P433-501	80294	BOURNS INSTRUMENTS INC
335C779H06	79500	WESTINGHOUSE ELECTRIC CORP
335C779H06	97942	NORTHROP GRUMMAN SYSTEMS CORPORATION

Techincal Specification:

ELECTRICAL RESISTANCE PER SECTION	500.0 OHMS SINGLE SECTION
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	175.0 SINGLE SECTION
BODY HEIGHT	0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
BODY LENGTH	1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM
BODY STYLE	RECTANGULAR W/MOUNTING HOLES/SLOTS
BODY WIDTH	0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM
OVERALL DIAMETER	0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
OVERALL HEIGHT	0.780 INCHES MINIMUM AND 0.844 INCHES MAXIMUM
OVERALL LENGTH	1.281 INCHES MINIMUM AND 1.345 INCHES MAXIMUM
MOUNTING FACILITY QUANTITY	2
MOUNTING HOLE DIAMETER	0.088 INCHES MINIMUM
MOUNTING METHOD	UNTHREADED HOLE
POWER DISSIPATION RATING PER SECTION IN WATTS	1.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
SECTION QUANTITY	1
SHAFT DIAMETER	0.125 INCHES NOMINAL
SHAFT LENGTH	0.047 INCHES MINIMUM AND 0.079 INCHES MAXIMUM
SHAFT STYLE	ROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-70.0 TO 70.0 SINGLE SECTION
TERMINAL LENGTH	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY	3 PIN
TEST DATA DOCUMENT	79500-335C779 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

Click here to Register for Free 30-day Trial