| ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS ALL SECTIONS |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 ALL SECTIONS |
| BODY HEIGHT | 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |
| BODY LENGTH | 3.155 INCHES MINIMUM AND 3.185 INCHES MAXIMUM |
| BODY STYLE | RECTANGULAR |
| BODY WIDTH | 0.655 INCHES MINIMUM AND 0.685 INCHES MAXIMUM |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 ALL SECTIONS |
| OVERALL HEIGHT | 1.105 INCHES MINIMUM AND 1.135 INCHES MAXIMUM |
| OVERALL LENGTH | 4.125 INCHES MINIMUM AND 4.215 INCHES MAXIMUM |
| OVERALL WIDTH | 0.785 INCHES MINIMUM AND 0.815 INCHES MAXIMUM |
| MOUNTING FACILITY QUANTITY | 2 |
| MOUNTING SLOT WIDTH | 0.175 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| MOUNTING METHOD | SLOT |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS |
| SECTION QUANTITY | 2 |
| SHAFT DIAMETER | 0.1871 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM |
| SHAFT STYLE | ROUND |
| SHAFT LENGTH | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| SPECIAL FEATURES | WIRE LEADS TERMINATED WITH WINCHESTER PLUG M7P; CASE SUPPLIED WITH MOUNTING LUGS |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS |
| TERMINAL LOCATION | REAR END |
| TERMINAL TYPE AND QUANTITY | 7 WIRE LEAD |
| TEST DATA DOCUMENT | 18876-9997820 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |