|
|
|
National Stock Number:
5905-00-991-1480
Federal Supply Class:
5905
National Item Identification Number:
009911480
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 60557-3 | 10112 | GENERAL DYNAMICS MOTION CONTROL LLC | | 77C707833P003 | 03538 | LOCKHEED MARTIN CORPORATION | | 77C707833PT3 | 03538 | LOCKHEED MARTIN CORPORATION | | 77C707833PT3REVL | 03538 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 10.000 KILOHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.01 TO 0.01 SINGLE SECTION | | SHAFT RUNOUT | 0.001 INCHES | | LATERAL RUNOUT | 0.002 INCHES | | PILOT DIAMETER RUNOUT | 0.00100 INCHES | | SHAFT BEARING TYPE | BALL | | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | PILOT DIAMETER | 1.87400 INCHES MINIMUM AND | | 1.87500 INCHES MAXIMUM | | PILOT LENGTH | 0.03000 INCHES MINIMUM AND | | 0.04000 INCHES MAXIMUM | | UNDERCUT DIAMETER | 1.880 INCHES NOMINAL | | UNDERCUT WIDTH | 0.07300 INCHES NOMINAL | | BODY DIAMETER | 1.995 INCHES MINIMUM AND | | 2.005 INCHES MAXIMUM | | BODY LENGTH | 2.636 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 2.00000 INCHES NOMINAL | | MOUNTING LIP DEPTH | 0.08800 INCHES MINIMUM AND | | 0.09800 INCHES MAXIMUM | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT LENGTH | 0.672 INCHES NOMINAL | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3620.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL | | MOUNTING METHOD | CLAMP RING | | TERMINAL TYPE AND QUANTITY | 3 SOLDER STUD | | TERMINAL LENGTH | 0.235 INCHES NOMINAL | | TERMINAL LOCATION | REAR END | | RELIABILITY INDICATOR | NOT ESTABLISHED | | DEPARTURE FROM CITED DOCUMENT | NON | | OVERALL LENGTH | 3.573 INCHES MINIMUM AND | | 3.605 INCHES MAXIMUM | | OVERALL DIAMETER | 1.995 INCHES MINIMUM AND | | 2.005 INCHES MAXIMUM |
|
|