| SECTION QUANTITY | 4 |
| ELECTRICAL RESISTANCE PER SECTION | 9.75 KILOHMS 1ST SECTION |
| 9.75 KILOHMS 2ND SECTION |
| 550.0 OHMS 3RD SECTION |
| 1.1 KILOHMS 4TH SECTION |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0 TO 1.0 1ST SECTION |
| -1.0 TO 1.0 2ND SECTION |
| -5.0 TO 5.0 3RD SECTION |
| -5.0 TO 5.0 4TH SECTION |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE LINEARITY |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.15 TO 0.15 1ST SECTION |
| -0.15 TO 0.15 2ND SECTION |
| -0.50 TO 0.50 3RD SECTION |
| -0.50 TO 0.50 4TH SECTION |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT BEARING TYPE | BALL |
| MAXIMUM STARTING TORQUE | 2.80 INCH-OUNCES |
| MAXIMUM RUNNING TORQUE | 2.00 INCH-OUNCES |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| FIXED TAP QUANTITY PER SECTION | 1 1ST SECTION |
| 1 2ND SECTION |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 172.5 1ST SECTION |
| 172.5 2ND SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -0.5 TO 0.5 DEG ANGULAR ROTATION 1ST SECTION |
| -0.5 TO 0.5 DEG ANGULAR ROTATION 2ND SECTION |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| PILOT DIAMETER | 1.3115 INCHES MINIMUM AND |
| 1.3120 INCHES MAXIMUM |
| PILOT LENGTH | 0.0730 INCHES MINIMUM |
| UNDERCUT DIAMETER | 1.3115 INCHES MINIMUM AND |
| 1.3120 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| BODY DIAMETER | 1.453 INCHES NOMINAL |
| BODY LENGTH | 2.617 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 1.4380 INCHES NOMINAL |
| MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
| ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| SHAFT STYLE | ROUND, SLOTTED |
| SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND |
| 0.2497 INCHES MAXIMUM |
| SHAFT LENGTH | 0.687 INCHES NOMINAL |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 354.0 NOMINAL |
| MOUNTING METHOD | CLAMP RING |
| TERMINAL TYPE AND QUANTITY | 14 TURRET |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TEST DATA DOCUMENT | 10001-2303002 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| OVERALL LENGTH | 3.336 INCHES MAXIMUM |
| OVERALL DIAMETER | 1.707 INCHES MAXIMUM |
| FRAGILITY FACTOR | MODERATELY DELICATE |
| PRECIOUS MATERIAL | SILVER |