| SECTION QUANTITY | 1 |
| ELECTRICAL RESISTANCE PER SECTION | 75.000 KILOHMS SINGLE SECTION |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 SINGLE SECTION |
| SHAFT BEARING TYPE | BALL |
| MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION |
| FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 37500.0 SINGLE SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -225.0 TO 225.0 OHMS SINGLE SECTION |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| PILOT DIAMETER | 1.31150 INCHES MINIMUM AND |
| 1.31250 INCHES MAXIMUM |
| PILOT LENGTH | 0.05700 INCHES MINIMUM AND |
| 0.06700 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 0.313 INCHES MINIMUM AND |
| 1.312 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.05800 INCHES NOMINAL |
| BODY DIAMETER | 1.535 INCHES MAXIMUM |
| BODY LENGTH | 0.930 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 1.53500 INCHES MAXIMUM |
| MOUNTING LIP DEPTH | 0.05200 INCHES MINIMUM AND |
| 0.06700 INCHES MAXIMUM |
| ANGLE OF MOUNTING HOLE IN DEG | 0.0 |
| ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 90.0 |
| MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.097 INCHES MINIMUM AND |
| 1.103 INCHES MAXIMUM |
| ACTUATOR TYPE | SINGLE SHAFT |
| SHAFT STYLE | ROUND |
| SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| SHAFT LENGTH | 0.418 INCHES MINIMUM AND |
| 0.456 INCHES MAXIMUM |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL |
| MOUNTING METHOD | CLAMP RING |
| MOUNTING FACILITY QUANTITY | 4 |
| TERMINAL TYPE AND QUANTITY | 4 SOLDER STUD |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| OVERALL LENGTH | 1.388 INCHES NOMINAL |
| OVERALL DIAMETER | 1.899 INCHES MAXIMUM |