|
|
|
National Stock Number:
5905-01-017-5850
Federal Supply Class:
5905
National Item Identification Number:
010175850
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 10211050-11 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 1684-20K | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | SHAFT BEARING TYPE | SLEEVE | | MAXIMUM STARTING TORQUE | 8.00 INCH-OUNCES | | MAXIMUM RUNNING TORQUE | 8.00 INCH-OUNCES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | BODY STYLE | RECTANGULAR BUSHING MOUNTED | | BODY LENGTH | 1.296 INCHES MINIMUM AND | | 1.328 INCHES MAXIMUM | | BODY WIDTH | 0.249 INCHES MINIMUM AND | | 0.281 INCHES MAXIMUM | | BODY HEIGHT | 0.310 INCHES MINIMUM AND | | 0.330 INCHES MAXIMUM | | MOUNTING BUSHING LENGTH | 0.234 INCHES MINIMUM AND | | 0.266 INCHES MAXIMUM | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT DIAMETER | 0.090 INCHES MINIMUM AND | | 0.110 INCHES MAXIMUM | | SHAFT LENGTH | 0.234 INCHES MINIMUM AND | | 0.266 INCHES MAXIMUM | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 6120.0 MINIMUM AND | | 9720.0 MAXIMUM | | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 6120.0 MINIMUM AND | | 9720.0 MAXIMUM | | MOUNTING METHOD | STANDARD BUSHING | | SCREW THREAD SERIES DESIGNATOR | UNF | | SCREW THREAD DIAMETER | 0.125 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | FEATURES PROVIDED | HUMIDITY PROOF | | TERMINAL TYPE AND QUANTITY | 3 PIN | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.110 INCHES MINIMUM AND | | 0.130 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.230 INCHES MINIMUM AND | | 0.250 INCHES MAXIMUM | | TERMINAL LENGTH | 0.140 INCHES MINIMUM AND | | 0.160 INCHES MAXIMUM | | TERMINAL LOCATION | REAR END | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 18876-10211050 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | CUBIC MEASURE | 0.12314544 CUBIC INCHES | | FRAGILITY FACTOR | MODERATELY RUGGED |
|
|