|
|
|
National Stock Number:
5905-01-032-1808
Federal Supply Class:
5905
National Item Identification Number:
010321808
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 2856546-2 | 56232 | LOCKHEED MARTIN CORPORATION | | 2P1457 | 11237 | CTS CORP OF CALIFORNIA DBA CTS ELECTRONICS CORP PASO ROBLES DIV ELECTROMECHANICAL GROUP | | 4331-102045-1 | 56232 | LOCKHEED MARTIN CORPORATION | | 5165188-2 | 53711 | NAVAL SEA SYSTEMS COMMAND | | CM41574-2 | 12697 | CLAROSTAT SENSORS AND CONTROLS |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SHAFT BEARING TYPE | BALL | | MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES | | MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | BODY DIAMETER | 1.219 INCHES NOMINAL | | BODY LENGTH | 0.625 INCHES NOMINAL | | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT LENGTH | 0.875 INCHES NOMINAL | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 290.0 MINIMUM AND | | 305.0 MAXIMUM | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 290.0 MINIMUM AND | | 305.0 MAXIMUM | | NONTURN DEVICE LOCATION | AT 9 OCLOCK | | NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 56232-4331-102045 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | CUBIC MEASURE | 0.729 CUBIC INCHES | | FRAGILITY FACTOR | MODERATELY RUGGED | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 53711 | | MFR SOURCE CONTROLLING REFERENCE | 5165188-2 |
|
|