5905-01-050-8175 RESISTOR NETWORK,FIXED,FILM Index 5905-01-050-8177 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-01-050-8176

Federal Supply Class:
5905

National Item Identification Number:
010508176

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
311-0520-0012697CLAROSTAT SENSORS AND CONTROLS
311-0520-0080009TEKTRONIX, INC.
D381-CM4041612697CLAROSTAT SENSORS AND CONTROLS
BA0159000371590CRL COMPONENTS INC
BA139-00171590CRL COMPONENTS INC


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION300.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION400.0 KILOHMS 2ND SECTION
ELECTRICAL RESISTANCE PER SECTION75.0 KILOHMS 1ST SECTION
ACTUATOR TRAVEL CONTROL FEATURESTOPS
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 ALL SECTIONS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER105.0 ALL SECTIONS
BODY DIAMETER0.812 INCHES NOMINAL
BODY LENGTH1.812 INCHES NOMINAL
BODY STYLECYLINDRICAL BUSHING MOUNTED
FEATURES PROVIDEDSWITCH
FIXED TAP QUANTITY PER SECTION2 1ST SECTION
FIXED TAP QUANTITY PER SECTION1 2ND SECTION
FUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS LINEAR
FUNCTION CONFORMITY PER SECTIONALL SECTIONS INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.15 TO 0.15 2ND SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.25 TO 0.25 1ST SECTION
OVERALL DIAMETER1.062 INCHES NOMINAL
OVERALL LENGTH2.937 INCHES NOMINAL
MAXIMUM RUNNING TORQUE0.80 INCH-OUNCES
MAXIMUM STARTING TORQUE6.00 INCH-OUNCES
MAXIMUM STOP TORQUE64.00 INCH-OUNCES
MOUNTING BUSHING LENGTH0.375 INCHES NOMINAL
MOUNTING METHODSTANDARD BUSHING
NONTURN DEVICE LOCATIONAT 3 OCLOCK
NONTURN DEVICE RADIUS0.469 INCHES NOMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS0.5 FREE AIR ALL SECTIONS
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 1ST SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-20.0 TO 20.0 2ND SECTION
RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG300.0 NOMINAL
SCREW THREAD DIAMETER0.375 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH32.0
SCREW THREAD SERIES DESIGNATORUNEF
SECTION QUANTITY2
SHAFT DIAMETER0.250 INCHES NOMINAL
SHAFT LENGTH1.000 INCHES NOMINAL
SHAFT STYLEROUND
SWITCH CONTACT ARRANGEMENTSINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED
SWITCH CURRENT TYPE AND RATING IN AMPS2.500 AC
SWITCH OPERATING POSITIONSTART OF ROTATION
SWITCH TYPEROTARY
SWITCH VOLTAGE RATING IN VOLTS120.0
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS200000.0 2ND SECTION
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS30000.0 1ST SECTION AND 50500.0 1ST SECTION
TAP LOCATION TOLERANCE PER SECTION-1.0 TO 1.0 OHMS ALL SECTIONS
TERMINAL LOCATIONREAR-BOTTOM
TERMINAL TYPE AND QUANTITY11 TAB, SOLDER LUG


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us