|
|
|
National Stock Number:
5905-01-051-6029
Federal Supply Class:
5905
National Item Identification Number:
010516029
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 113D8775P1 | 89954 | BAE SYSTEMS CONTROLS INC. | | 114WS228 | 08815 | HONEYWELL INTERNATIONAL INC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 2.500 KILOHMS 2ND SECTION | | ELECTRICAL RESISTANCE PER SECTION | 100.000 OHMS 1ST SECTION | | ACTUATOR TYPE | DUAL CONCENTRIC | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 340.0 ALL SECTIONS | | BODY DIAMETER | 1.160 INCHES MINIMUM | | BODY LENGTH | 2.000 INCHES MINIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | FIRST FLAT LENGTH | 0.280 INCHES MAXIMUM | | FLAT HEIGHT | 0.080 INCHES MAXIMUM | | MOUNTING BUSHING LENGTH | 0.280 INCHES NOMINAL | | MOUNTING FACILITY QUANTITY | 3 | | MOUNTING METHOD | SLOT | | MOUNTING SLOT WIDTH | 0.060 INCHES MAXIMUM | | NONTURN DEVICE LOCATION | AT 9 OCLOCK | | POWER DISSIPATION RATING PER SECTION IN WATTS | 12.5 FREE AIR 2ND SECTION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR 1ST SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS | | SECTION QUANTITY | 2 | | SHAFT DIAMETER | 0.125 INCHES MAXIMUM | | SHAFT LENGTH | 0.430 INCHES MAXIMUM | | SHAFT STYLE | ROUND, FLATTED | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO 30.0 ALL SECTIONS | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG |
|
|