|
|
|
National Stock Number:
5905-01-054-3392
Federal Supply Class:
5905
National Item Identification Number:
010543392
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 0N503111-1 | 98230 | NATIONAL SECURITY AGENCY |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 250.000 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM | | BODY LENGTH | 0.437 INCHES MINIMUM AND 0.469 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW | | FIRST FLAT LENGTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM | | FLAT HEIGHT | 0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM | | MOUNTING BUSHING LENGTH | 0.237 INCHES MINIMUM AND 0.266 INCHES MAXIMUM | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE LOCATION | AT 6 OCLOCK | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 350.0 MINIMUM AND 360.0 MAXIMUM | | SCREW THREAD DIAMETER | 0.250 INCHES MAXIMUM | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.122 INCHES MINIMUM AND 0.126 INCHES MAXIMUM | | SHAFT LENGTH | 0.750 INCHES NOMINAL | | SHAFT STYLE | ROUND, FLATTED | | TERMINAL LOCATION | REAR END | | TERMINAL LENGTH | 0.234 INCHES MAXIMUM | | TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 98230-0N503111-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|