|
|
|
National Stock Number:
5905-01-078-6625
Federal Supply Class:
5905
National Item Identification Number:
010786625
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 23C3-2914 | 19176 | SERVO INSTRUMENT CORPORATION | | 2635-013-01-8 | 96169 | ELECTRIC BOAT CORPORATION | | 2635-013-01-8B | 96169 | ELECTRIC BOAT CORPORATION | | 263501301-4 | 96169 | ELECTRIC BOAT CORPORATION | | 263501301-8 | 04454 | SENSOR SYSTEMS, L.L.C. | | 845-4687683-8 | 04454 | SENSOR SYSTEMS, L.L.C. | | 845-4687683-8 | 06880 | DATA INSTRUMENTS INC | | 845-4687683-8 | 08815 | HONEYWELL INTERNATIONAL INC | | 845-4687683-8 | 11534 | BEI SENSORS & SYSTEMS COMPANY, INC. | | 845-4687683-8 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 845-4687683-8 | 94603 | HONEYWELL SENSING & CONTROL |
|
Techincal Specification:
| SECTION QUANTITY | 3 | | ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS ALL SECTIONS | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS | | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY | | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 ALL SECTIONS | | SHAFT RUNOUT | 0.001 INCHES | | LATERAL RUNOUT | 0.001 INCHES | | PILOT DIAMETER RUNOUT | 0.00100 INCHES | | SHAFT RADIAL PLAY | 0.001 INCHES | | SHAFT BEARING TYPE | BALL | | SHAFT END PLAY | 0.00300 INCHES | | MAXIMUM STARTING TORQUE | 0.60 INCH-OUNCES | | MAXIMUM RUNNING TORQUE | 0.50 INCH-OUNCES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.75 FREE AIR ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS | | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 174.5 ALL SECTIONS | | TAP LOCATION TOLERANCE PER SECTION | -1.5 TO 1.5 DEG ANGULAR ROTATION ALL SECTIONS | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | PILOT DIAMETER | 1.3120 INCHES NOMINAL | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | UNDERCUT DIAMETER | 1.313 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0730 INCHES NOMINAL | | BODY DIAMETER | 1.468 INCHES MAXIMUM | | BODY LENGTH | 2.820 INCHES MAXIMUM | | MOUNTING LIP DIAMETER | 1.4370 INCHES NOMINAL | | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT LENGTH | 1.812 INCHES NOMINAL | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 348.0 NOMINAL | | MOUNTING METHOD | CLAMP RING | | TERMINAL TYPE AND QUANTITY | 12 TAB, SOLDER LUG | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 96169-845-4687683 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|