|
|
|
National Stock Number:
5905-01-080-4479
Federal Supply Class:
5905
National Item Identification Number:
010804479
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 10WB2-2885 | 19176 | SERVO INSTRUMENT CORPORATION | | 58WS-108 | 08815 | HONEYWELL INTERNATIONAL INC | | 83410 | 94988 | COOPER INDUSTRIES INC CHAMPION AVIATION PRODUCTS | | 83410 94988 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | RV1/2-S102 | 99957 | BOWMAR/TIC INC SUB OF BOWMAR INSTRUMENT CORP | | RV1/2-S102A | 04454 | SENSOR SYSTEMS, L.L.C. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 25.000 KILOHMS ALL SECTIONS | | ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 0.625 INCHES NOMINAL | | BODY LENGTH | 1.000 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | FIRST FLAT LENGTH | 0.250 INCHES NOMINAL | | FLAT HEIGHT | 0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM | | MAXIMUM STARTING TORQUE | 4.50 INCH-OUNCES | | MAXIMUM STOP TORQUE | 32.00 INCH-OUNCES | | MAXIMUM RUNNING TORQUE | 4.50 INCH-OUNCES | | MOUNTING METHOD | STANDARD BUSHING | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 2 | | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM | | SHAFT STYLE | ROUND, FLATTED | | SHAFT LENGTH | 0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM | | SPECIAL FEATURES | MOUNTING METHOD: STANDARD BUSHING W/SHAFT SEAL | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS | | TERMINAL TYPE AND QUANTITY | 4 TURRET |
|
|