|
|
|
National Stock Number:
5905-01-081-2223
Federal Supply Class:
5905
National Item Identification Number:
010812223
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| 584R264 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 584R264H01 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | MG730N-15-20M-1 | 19647 | CADDOCK ELECTRONICS INC. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 20.000 MEGOHMS | | AMBIENT TEMP AT FULL RATED POWER | 125.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 225.0 | | BODY DIAMETER | 0.210 INCHES MINIMUM AND 0.270 INCHES MAXIMUM | | BODY LENGTH | 1.420 INCHES MINIMUM AND 1.580 INCHES MAXIMUM | | INCLOSURE TYPE | ENCAPSULATED | | PART NAME ASSIGNED BY CONTROLLING AGENCY | RESISTOR,FIXED,THICK FILM, 3 WATTS HIGH VOLTAGE, NON-INDUCTIVE BURNED-IN | | POWER DISSIPATION RATING IN WATTS | 3.000 FREE AIR | | PRECIOUS MATERIAL AND LOCATION | LEADS SHALL BE GOLD PLATED DUMET, TYPE D I/A/W MIL-STD-1276 GOLD | | PRECIOUS MATERIAL | GOLD | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 | | SPECIAL TEST FEATURES | AMBIENT TEMPERATURE RANGE SHALL BE -55C TO 225C | | SPECIAL FEATURES | RESISTANCE: 20M, INITIAL RESISTANCE TOLERANCE: + OR - 1%, MAXIMUM CONTINUOUS WORKING VOLTAGE VOLTS DC OR RMS: 7750, MAXIMUM PEAK VOLTAGE VOLTS DC OR RMS: 9600, POWER CONDITIONING TEST TEMPERATURE: + 15C , -0C: 25C | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | SUPPLEMENTARY FEATURES | MATERIALS AND FINISHES: THE RESISTANCE ELEMENT SHALL BE THICK FILM, THE CORE SHALL BE ALUMINUM OXIDE, THE PROTECTIVE COATING SHALL BE HIGH TEMPERATURE SILICONE, THE LEADS SHALL BE GOLD PLATED DUMET, TYPE D, I/A/W MIL-STD-1276 | | TERMINAL LENGTH | 1.480 INCHES MINIMUM AND 1.620 INCHES MAXIMUM | | TERMINAL TYPE | WIRE LEAD | | TERMINAL WIDTH | 0.038 INCHES MINIMUM AND 0.042 INCHES MAXIMUM |
|
|