|
|
|
National Stock Number:
5905-01-123-0703
Federal Supply Class:
5905
National Item Identification Number:
011230703
Description:
RESISTOR,FIXED,WIRE WOUND
Detail:
INC 37404 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The items must have inherent characteristics of inducing little or no self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, INDUCTIVE.
|
Manufacturer Information:
| 10127377 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 956147-16B | 82577 | RAYTHEON COMPANY | | ESN-10-6 20.5 OHMS 1% | 91637 | VISHAY DALE ELECTRONICS, LLC | | ESN-10-6-16B | 91637 | VISHAY DALE ELECTRONICS, LLC | | ESN-10-6-20.5OHMSPORM1PCT | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| AMBIENT TEMP AT FULL RATED POWER | 25.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 | | BODY DIAMETER | 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM | | BODY LENGTH | 1.718 INCHES MINIMUM AND 1.842 INCHES MAXIMUM | | ELECTRICAL RESISTANCE | 20.500 OHMS | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 4.000 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 | | SPECIAL FEATURES | RESISTOR INTENDED FOR USE IN A SILICATE ESTER COOLING OIL | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -65.0 TO 150.0 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -20.0 TO 20.0 | | TERMINAL LENGTH | 1.500 INCHES MINIMUM | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 82577-956147 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|