|
|
|
National Stock Number:
5905-01-123-8177
Federal Supply Class:
5905
National Item Identification Number:
011238177
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 316E181391 | 01121 | ROCKWELL AUTOMATION, INC. | | 77C719772P002 | 03538 | LOCKHEED MARTIN CORPORATION | | P121-001-01 | 95542 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 390.000 OHMS HIGHEST RESISTANCE VALUE | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 | | BODY HEIGHT | 0.100 INCHES NOMINAL | | BODY LENGTH | 0.845 INCHES MAXIMUM | | BODY WIDTH | 0.245 INCHES NOMINAL | | ELECTRICAL RESISTANCE | 180.000 OHMS LOWEST RESISTANCE VALUE | | IDENTICAL VALUE RESISTOR QUANTITY | 14 HIGHEST RESISTANCE VALUE | | IDENTICAL VALUE RESISTOR QUANTITY | 14 LOWEST RESISTANCE VALUE | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 1.800 TOTAL NETWORK | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -2.000 TO 2.000 EACH RESISTOR | | STYLE DESIGNATOR | DUAL INLINE | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -100.0 TO 100.0 | | TERMINAL LENGTH | 0.164 INCHES NOMINAL | | TERMINAL QUANTITY | 16 | | TERMINAL TYPE | TAB, SOLDER LUG | | TERMINAL WIDTH | 0.017 INCHES NOMINAL | | TEST DATA DOCUMENT | 95542-+121-001 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|