|
|
|
National Stock Number:
5905-01-123-8452
Federal Supply Class:
5905
National Item Identification Number:
011238452
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| SM-C-283204-2 | 12697 | CLAROSTAT SENSORS AND CONTROLS | | SM-C-283204-2 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| ACTUATOR TYPE | SINGLE SHAFT | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION | | BODY DIAMETER | 1.156 INCHES MAXIMUM | | BODY LENGTH | 0.594 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 251.0 MINIMUM AND 318.0 MAXIMUM | | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION | | FEATURES PROVIDED | HUMIDITY PROOF | | FIRST FLAT LENGTH | 0.625 INCHES NOMINAL | | FLAT HEIGHT | 0.219 INCHES NOMINAL | | FRAGILITY FACTOR | MODERATELY RUGGED | | MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES | | MAXIMUM STOP TORQUE | 80.00 INCH-OUNCES | | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL | | OVERALL DIAMETER | 1.876 INCHES MAXIMUM | | OVERALL LENGTH | 1.500 INCHES MAXIMUM | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -3.0 TO 0.0 -55 DEG CELSIUS SINGLE SECTION AND +0.0 TO 3.0 120 DEG CELSIUS SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 251.0 MINIMUM AND 318.0 MAXIMUM | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT LENGTH | 0.906 INCHES NOMINAL | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT STYLE | ROUND, FLATTED | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 80063-SM-C-283204 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|