|
|
|
National Stock Number:
5905-01-129-2672
Federal Supply Class:
5905
National Item Identification Number:
011292672
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 6153-36-0 | 73138 | BI TECHNOLOGIES CORPORATION | | 6153-36-0R2KL1.0 | 73138 | BI TECHNOLOGIES CORPORATION |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 60.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION | | BEARING TYPE | BALL SHAFT | | BODY DIAMETER | 0.891 INCHES NOMINAL | | BODY LENGTH | 0.500 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FRAGILITY FACTOR | RUGGED | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 SINGLE SECTION | | LATERAL RUNOUT | 0.002 INCHES | | MAXIMUM RUNNING TORQUE | 0.50 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 0.50 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING | | SPECIAL FEATURES | APPROXIMATELY 288 DEGREE SHORTED SEGMENT BETWEEN SLIDER AND CLOCKWISE TERMINAL | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | PILOT DIAMETER RUNOUT | 0.001 INCHES | | PILOT DIAMETER | 0.7500 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 348.0 MINIMUM | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM | | SHAFT LENGTH | 0.500 INCHES NOMINAL | | SHAFT RADIAL PLAY | 0.001 INCHES | | SHAFT RUNOUT | 0.001 INCHES | | SHAFT STYLE | ROUND | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -150.0 TO 300.0 SINGLE SECTION | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 3 TURRET | | UNDERCUT DIAMETER | 0.781 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
|
|