|
|
|
National Stock Number:
5905-01-130-2512
Federal Supply Class:
5905
National Item Identification Number:
011302512
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 10127425 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 164-5008 | 02111 | VISHAY SPRAGUE INC | | 164-55 | 02111 | VISHAY SPRAGUE INC | | 2795563-1 | 55972 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS | | 3750S-481-103 | 80294 | BOURNS INSTRUMENTS INC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 10.000 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION | | BODY DIAMETER | 0.500 INCHES NOMINAL | | BODY LENGTH | 1.125 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW | | MAXIMUM STOP TORQUE | 20.00 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 0.5000 INCHES NOMINAL | | MOUNTING METHOD | FLANGE | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | PILOT DIAMETER | 0.3740 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.093 INCHES NOMINAL | | SHAFT RADIAL PLAY | 0.001 INCHES | | SHAFT RUNOUT | 0.001 INCHES | | SHAFT END PLAY | 0.00300 INCHES | | SHAFT LENGTH | 0.313 INCHES NOMINAL | | SHAFT STYLE | ROUND | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION | | TERMINAL TYPE AND QUANTITY | 3 TURRET | | UNDERCUT DIAMETER | 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
|
|