|
|
|
National Stock Number:
5905-01-131-2861
Federal Supply Class:
5905
National Item Identification Number:
011312861
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 0N299549 | 98230 | NATIONAL SECURITY AGENCY |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 2.5 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 120.0 SINGLE SECTION | | BODY DIAMETER | 0.500 INCHES NOMINAL | | BODY LENGTH | 0.435 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.010 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.020 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -0.25/+0.25 SINGLE SECTION | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.125 INCHES NOMINAL | | SHAFT LENGTH | 0.035 INCHES NOMINAL | | SHAFT STYLE | ROUND, SLOTTED | | SPECIAL FEATURES | MAKE FROM PART NR. 0N299328 | | TERMINAL LOCATION | REAR END | | TERMINAL LENGTH | 0.688 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 3 PIN | | TEST DATA DOCUMENT | 98230-0N299549 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|