|
|
|
National Stock Number:
5905-01-133-7165
Federal Supply Class:
5905
National Item Identification Number:
011337165
Description:
RESISTOR,FIXED,WIRE WOUND,INDUCT
Detail:
INC 37403 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
|
Manufacturer Information:
| 10127441 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 956143-1B | 82577 | RAYTHEON COMPANY | | ENH-10-6 .05 OHM 1% | 91637 | VISHAY DALE ELECTRONICS, LLC | | ENH-10-6-.05OHMS1PCT | 91637 | VISHAY DALE ELECTRONICS, LLC | | ENH-10-6-1B | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 0.050 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 25.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 | | BODY HEIGHT | 0.375 INCHES MINIMUM AND 0.437 INCHES MAXIMUM | | BODY LENGTH | 0.688 INCHES MINIMUM AND 0.812 INCHES MAXIMUM | | BODY WIDTH | 0.376 INCHES MINIMUM AND 0.500 INCHES MAXIMUM | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM | | INCLOSURE TYPE | ENCASED | | MOUNTING HOLE SIZE | 0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM | | POWER DISSIPATION RATING IN WATTS | 10.000 HEAT SINK | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 | | STYLE DESIGNATOR | AXIAL TERMINAL (S) | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -150.0 TO 150.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 | | TERMINAL LENGTH | 0.250 INCHES MINIMUM AND 0.374 INCHES MAXIMUM | | TERMINAL TYPE | TAB, SOLDER LUG | | TERMINAL WIDTH | 0.140 INCHES MINIMUM |
|
|