|
|
|
National Stock Number:
5905-01-135-0783
Federal Supply Class:
5905
National Item Identification Number:
011350783
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 20M487 | 01121 | ROCKWELL AUTOMATION, INC. | | 216-27516-3 | 80378 | TRIUMPH AEROSTRUCTURES, LLC |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 260.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 2.5 KILOHMS ALL SECTIONS | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 ALL SECTIONS | | BODY HEIGHT | 0.625 INCHES NOMINAL | | BODY LENGTH | 1.391 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR BUSHING MOUNTED | | BODY WIDTH | 0.625 INCHES NOMINAL | | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK | | FEATURES PROVIDED | SWITCH | | FRAGILITY FACTOR | RUGGED | | MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES | | MAXIMUM STOP TORQUE | 64.00 INCH-OUNCES | | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL | | OPERATING POSITION | START OF ROTATION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR ALL SECTIONS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 300.0 NOMINAL | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 2 | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT LENGTH | 0.875 INCHES NOMINAL | | SHAFT STYLE | ROUND | | SWITCH CONTACT ARRANGEMENT | DOUBLE POLE, SINGLE THROW, ONE OPEN, ONE CLOSED | | SWITCH CURRENT TYPE AND RATING IN AMPS | 2.000 AC | | SWITCH TYPE | ROTARY | | SWITCH VOLTAGE RATING IN VOLTS | 125.0 | | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS | | TERMINAL TYPE AND QUANTITY | 10 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 80378-216-27516 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|