| ELECTRICAL RESISTANCE PER SECTION | 1.0 MEGOHMS SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION |
| BODY HEIGHT | 1.045 INCHES MINIMUM AND 1.055 INCHES MAXIMUM |
| BODY LENGTH | 1.455 INCHES MINIMUM AND 1.465 INCHES MAXIMUM |
| BODY WIDTH | 0.805 INCHES MINIMUM AND 0.815 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.315 INCHES MINIMUM AND 0.345 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.150 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.725 INCHES MINIMUM AND 0.735 INCHES MAXIMUM |
| CUBIC MEASURE | 1.259 CUBIC INCHES |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10 TO 0.10 SINGLE SECTION |
| MOUNTING METHOD | TERMINAL |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0 TO 1.0 ALL SECTIONS |
| SECTION QUANTITY | 1 |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION |
| TERMINAL LENGTH | 0.295 INCHES MINIMUM AND 0.325 INCHES MAXIMUM |
| TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| TERMINAL TYPE AND QUANTITY | 3 PIN |
| TEST DATA DOCUMENT | 81755-C11099 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |