|
|
|
National Stock Number:
5905-01-138-9501
Federal Supply Class:
5905
National Item Identification Number:
011389501
Description:
RESISTOR,FIXED,WIRE WOUND,INDUCT
Detail:
INC 37403 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
|
Manufacturer Information:
| 200S-360OHMPORM5PCT | 00213 | STRUTHERS-DUNN INC. | | 55-0225-36005B | 72914 | GRIMES AEROSPACE COMPANY | | F2-360OHMPORM5PCT | 12463 | OMTRONICS MFG CO INC | | 995-1A-3600J | 44655 | OHMITE HOLDING, L.L.C. | | B-2-3600J | 54294 | SHALLCROSS INC | | RS2B-67-360OHMPORM5PCT | 91637 | VISHAY DALE ELECTRONICS, LLC | | SAV22-360OHMPORM5PCT | 14193 | CAL-R INC | | TG-2-360OHMPORM5PCT | 15915 | TEPRO OF FLORIDA, INC. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 360.000 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 25.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 | | BODY DIAMETER | 0.157 INCHES MAXIMUM | | BODY LENGTH | 0.454 INCHES MAXIMUM | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 1.500 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -260.0 TO 260.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -65.0 TO 275.0 | | TERMINAL LENGTH | 1.250 INCHES MINIMUM | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 72914-55-0225 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNPACKAGED UNIT WEIGHT | 0.450 GRAMS |
|
|