|
|
|
National Stock Number:
5905-01-143-0247
Federal Supply Class:
5905
National Item Identification Number:
011430247
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 1085AS702 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 1521-1052 | 11534 | BEI SENSORS & SYSTEMS COMPANY, INC. |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 340.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 2.000 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION | | BODY DIAMETER | 1.468 INCHES MAXIMUM | | BODY LENGTH | 1.060 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION 360 DEG SINE-COSINE | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE CONFORMITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 SINGLE SECTION | | LATERAL RUNOUT | 0.002 INCHES | | MAXIMUM RUNNING TORQUE | 0.80 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES | | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.25 | | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 1.4370 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING | | PILOT DIAMETER RUNOUT | 0.00100 INCHES | | PILOT DIAMETER | 1.3125 INCHES NOMINAL | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT END PLAY | 0.00500 INCHES | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT RADIAL PLAY | 0.001 INCHES | | SHAFT LENGTH | 0.375 INCHES NOMINAL | | SHAFT RUNOUT | 0.002 INCHES | | SHAFT STYLE | ROUND | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 3 TURRET | | TEST DATA DOCUMENT | 30003-1085AS702 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT DIAMETER | 1.313 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |
|
|