| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 MINIMUM AND 3610.0 MAXIMUM |
| ELECTRICAL RESISTANCE PER SECTION | 50.0 KILOHMS 1ST SECTION AND 250.0 OHMS 2ND SECTION |
| ACTUATOR TYPE | DUAL CONCENTRIC |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| BEARING TYPE | SLEEVE SHAFT |
| BODY HEIGHT | 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| BODY LENGTH | 1.805 INCHES MINIMUM AND 1.861 INCHES MAXIMUM |
| BODY STYLE | RECTANGULAR BUSHING MOUNTED |
| BODY WIDTH | 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| CUBIC MEASURE | 0.762 CUBIC INCHES |
| FEATURES PROVIDED | SWITCH |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 ALL SECTIONS |
| MAXIMUM RUNNING TORQUE | 2.00 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES |
| MAXIMUM STOP TORQUE | 48.00 INCH-OUNCES |
| MOUNTING BUSHING LENGTH | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| MOUNTING METHOD | STANDARD BUSHING |
| NONTURN DEVICE LOCATION | AT 9 OCLOCK |
| NONTURN DEVICE RADIUS | 0.300 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 MINIMUM AND 3615.0 MAXIMUM |
| SCREW THREAD DIAMETER | 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| SECTION QUANTITY | 2 |
| SHAFT END PLAY | 0.014 INCHES |
| SHAFT DIAMETER | 0.289 INCHES MINIMUM AND 0.299 INCHES MAXIMUM |
| SHAFT LENGTH | 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| SHAFT RADIAL PLAY | 0.005 INCHES |
| SHAFT RUNOUT | 0.006 INCHES |
| SHAFT STYLE | ROUND, STEPPED |
| SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED |
| SWITCH CURRENT TYPE AND RATING IN AMPS | 1.000 AC |
| SWITCH OPERATING POSITION | ANY POSITION OF ROTATION TRAVEL |
| SWITCH TYPE | PUSH-PULL |
| SWITCH VOLTAGE RATING IN VOLTS | 125.0 |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 ALL SECTIONS |
| TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| TERMINAL TYPE AND QUANTITY | 10 TAB, SOLDER LUG |
| UNDERCUT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| UNDERCUT LENGTH | 0.369 INCHES MINIMUM AND 0.431 INCHES MAXIMUM |