|
|
|
National Stock Number:
5905-01-146-9047
Federal Supply Class:
5905
National Item Identification Number:
011469047
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 200FL1-171 | 08815 | HONEYWELL INTERNATIONAL INC | | 7756269-003 | 36378 | RAYTHEON TECHNICAL SERVICES COMPANY | | 7756269-003 | 98747 | OGDEN AIR LOGISTICS CENTER |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 165.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 160.0 SINGLE SECTION | | BODY DIAMETER | 2.031 INCHES MAXIMUM | | BODY LENGTH | 1.310 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION | | FRAGILITY FACTOR | MODERATELY RUGGED | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 SINGLE SECTION | | LATERAL RUNOUT | 0.001 INCHES | | MAXIMUM STARTING TORQUE | 0.60 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | PILOT DIAMETER RUNOUT | 0.00100 INCHES | | PILOT DIAMETER | 1.8750 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM | | SHAFT BEARING TYPE | BEARING | | SHAFT LENGTH | 0.750 INCHES NOMINAL | | SHAFT END PLAY | 0.00500 INCHES | | SHAFT STYLE | ROUND | | SHAFT RADIAL PLAY | 0.001 INCHES | | SHAFT RUNOUT | 0.001 INCHES | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 82.5 SINGLE SECTION | | TAP LOCATION TOLERANCE PER SECTION | -0.5 TO 0.5 DEG ANGULAR ROTATION SINGLE SECTION | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 3 TURRET | | TEST DATA DOCUMENT | 98747-7756269 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT DIAMETER | 1.875 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |
|
|