|
|
|
National Stock Number:
5905-01-147-5705
Federal Supply Class:
5905
National Item Identification Number:
011475705
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| 321-0962-03 | 80009 | TEKTRONIX, INC. | | CMF-55-116 8001C T-2 | 91637 | VISHAY DALE ELECTRONICS, LLC | | NC55C8000C | 24546 | DALE ELECTRONICS INC A VISHAY INTERTECHOLOGY INC CO P O BOX 74 NORFOLK NE68702-0074 | | CMF-55-116G80000C | 91637 | VISHAY DALE ELECTRONICS, LLC | | MFF1861D80000C | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 8.000 KILOHMS | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 100.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 175.0 | | BODY DIAMETER | 0.080 INCHES MINIMUM AND 0.120 INCHES MAXIMUM | | BODY LENGTH | 0.204 INCHES MINIMUM AND 0.343 INCHES MAXIMUM | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.125 FREE AIR | | PROPRIETARY CHARACTERISTICS | PACS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -0.250/+0.250 | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0/+50.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0/+175.0 | | TERMINAL LENGTH | 1.375 INCHES MINIMUM | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 80009-321-0962-03 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|