|
|
|
National Stock Number:
5905-01-150-4536
Federal Supply Class:
5905
National Item Identification Number:
011504536
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 114WS-244 | 08815 | HONEYWELL INTERNATIONAL INC | | 166747-01 | 35351 | GE AVIATION SYSTEMS LLC |
|
Techincal Specification:
| SECTION QUANTITY | 2 | | ELECTRICAL RESISTANCE PER SECTION | 100.0 KILOHMS 1ST SECTION | | 2.0 KILOHMS 2ND SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -2.0 TO 2.0 1ST SECTION | | -10.0 TO 10.0 2ND SECTION | | FUNCTION CONFORMITY PER SECTION | 1ST SECTION PROPORTIONAL CONFORMITY | | 2ND SECTION ABSOLUTE LINEARITY | | FUNCTION CHARACTERISTIC PER SECTION | 1ST SECTION EQUATION | | 2ND SECTION LINEAR | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.50 TO 1.50 1ST SECTION | | -1.00 TO 1.50 2ND SECTION | | SHAFT RUNOUT | 0.002 INCHES | | LATERAL RUNOUT | 0.005 INCHES | | PILOT DIAMETER RUNOUT | 0.002 INCHES | | SHAFT RADIAL PLAY | 0.005 INCHES | | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.5 | | SHAFT BEARING TYPE | BEARING | | SHAFT END PLAY | 0.005 INCHES | | MAXIMUM STOP TORQUE | 144.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES | | MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 1ST SECTION | | -600.0 TO 600.0 2ND SECTION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 ALL SECTIONS | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | BODY DIAMETER | 1.325 INCHES MAXIMUM | | BODY LENGTH | 1.250 INCHES MAXIMUM | | MOUNTING BUSHING LENGTH | 0.240 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND | | 0.2499 INCHES MAXIMUM | | SHAFT LENGTH | 0.710 INCHES MINIMUM AND | | 0.730 INCHES MAXIMUM | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 273.4 MAXIMUM | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 260.4 NOMINAL | | NONTURN DEVICE LOCATION | AT 12 OCLOCK | | NONTURN DEVICE RADIUS | 0.531 INCHES MINIMUM AND | | 0.541 INCHES MAXIMUM | | MOUNTING METHOD | STANDARD BUSHING | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | FEATURES PROVIDED | HUMIDITY PROOF | | TERMINAL TYPE AND QUANTITY | 6 TURRET | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 35351-166747 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | OVERALL LENGTH | 1.980 INCHES MAXIMUM | | OVERALL DIAMETER | 1.900 INCHES MAXIMUM | | CUBIC MEASURE | 0.488 CUBIC INCHES | | FRAGILITY FACTOR | MODERATELY RUGGED |
|
|