|
|
|
National Stock Number:
5905-01-150-6347
Federal Supply Class:
5905
National Item Identification Number:
011506347
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 164-5007-10K | K1021 | VISHAY LIMITED SPECTROL DIV | | 40-541-5723-10 | K5294 | GE AVIATION SYSTEMS LIMITED |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 MAXIMUM | | ELECTRICAL RESISTANCE PER SECTION | 10.000 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 0.515 INCHES MAXIMUM | | BODY LENGTH | 1.188 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CW | | FIRST FLAT LENGTH | 0.210 INCHES NOMINAL | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE LINEARITY | | MAXIMUM RUNNING TORQUE | 0.30 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 0.500 INCH-OUNCES | | MAXIMUM STOP TORQUE | 20.00 INCH-OUNCES | | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.1 | | MOUNTING SLOT WIDTH | 0.063 INCHES NOMINAL | | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 0.5150 INCHES MAXIMUM | | MOUNTING METHOD | CLAMP | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | PILOT DIAMETER | 0.3740 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 MAXIMUM | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.093 INCHES NOMINAL | | SHAFT LENGTH | 0.624 INCHES NOMINAL | | SHAFT STYLE | ROUND, V FLATTED | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -200.0 TO 200.0 SINGLE SECTION | | TERMINAL LENGTH | 0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 2 TURRET | | UNDERCUT DIAMETER | 0.400 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0630 INCHES NOMINAL |
|
|