|
|
|
National Stock Number:
5905-01-155-0644
Federal Supply Class:
5905
National Item Identification Number:
011550644
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 530C6000-04-027 | 86360 | GE AVIATION SYSTEMS LLC DBA GE AVIATION DIV INFORMATION SYSTEMS - GERMANTOWN | | L06-3C-103 | 73138 | BI TECHNOLOGIES CORPORATION | | MSP06A03-103G | 56845 | VISHAY DALE ELECTRONICS INC | | L06-3R10K | 73138 | BI TECHNOLOGIES CORPORATION | | L063C103 | 73138 | BI TECHNOLOGIES CORPORATION | | MSP06A03-103G | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 10.000 KILOHMS EACH RESISTOR | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 | | BODY HEIGHT | 0.200 INCHES MAXIMUM | | BODY LENGTH | 0.590 INCHES MAXIMUM | | BODY WIDTH | 0.090 INCHES MAXIMUM | | IDENTICAL VALUE RESISTOR QUANTITY | 3 EACH RESISTOR | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.600 TOTAL NETWORK | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -2.000 TO 2.000 EACH RESISTOR | | SCHEMATIC DIAGRAM DESIGNATOR | BALANCED LADDER NETWORK | | STYLE DESIGNATOR | SINGLE INLINE | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -100.0 TO 100.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 150.0 | | TERMINAL LENGTH | 0.125 INCHES NOMINAL | | TERMINAL QUANTITY | 6 | | TERMINAL TYPE | PIN | | TEST DATA DOCUMENT | 86360-530C6000-04 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|