| ELECTRICAL RESISTANCE | 1.000 KILOHMS 1ST INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 1.000 MEGOHMS HIGHEST RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 47.000 OHMS LOWEST RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 5.100 KILOHMS 2ND INTERMEDIATE RESISTANCE VALUE |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 |
| BODY HEIGHT | 0.100 INCHES MAXIMUM |
| BODY LENGTH | 0.250 INCHES NOMINAL |
| BODY WIDTH | 0.250 INCHES NOMINAL |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 1ST INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 HIGHEST RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 2 2ND INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 4 LOWEST RESISTANCE VALUE |
| INCLOSURE METHOD | HERMETICALLY SEALED |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 EACH RESISTOR |
| STYLE DESIGNATOR | FLAT PACK |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -100.0 TO 100.0 FIRST TEMP COEFFICIENT |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 TEMP RANGE OF FIRST TEMP COEFFICIENT |
| TERMINAL LENGTH | 0.030 INCHES NOMINAL |
| TERMINAL QUANTITY | 16 |
| TERMINAL TYPE | TERMINAL TYPE PER BODY STYLE |
| TERMINAL WIDTH | 0.020 INCHES NOMINAL |
| TEST DATA DOCUMENT | 97942-585R007 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |