|
|
|
National Stock Number:
5905-01-155-7652
Federal Supply Class:
5905
National Item Identification Number:
011557652
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 1888-3-0 | 73138 | BI TECHNOLOGIES CORPORATION | | 208-011-3 | 57489 | VISHAY THIN FILM LLC | | DFP16-11-470G-22 | 91637 | VISHAY DALE ELECTRONICS, LLC | | 583R378H03 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 47.000 OHMS EACH RESISTOR | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 | | BODY HEIGHT | 0.065 INCHES MAXIMUM | | BODY LENGTH | 0.265 INCHES MAXIMUM | | BODY WIDTH | 0.400 INCHES MAXIMUM | | IDENTICAL VALUE RESISTOR QUANTITY | 8 EACH RESISTOR | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.750 TOTAL NETWORK | | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -4.000 TO 4.000 EACH RESISTOR | | SCHEMATIC DIAGRAM DESIGNATOR | ISOLATED ARRAY | | STYLE DESIGNATOR | SINGLE INLINE | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 250.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 | | TERMINAL LENGTH | 0.250 INCHES MINIMUM | | TERMINAL QUANTITY | 16 | | TERMINAL TYPE | PIN | | TEST DATA DOCUMENT | 97942-583R378 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|