|
|
|
National Stock Number:
5905-01-160-8646
Federal Supply Class:
5905
National Item Identification Number:
011608646
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 104-0060 | 54380 | SAGEM AVIONICS INC. |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 SINGLE SECTION | | SHAFT BEARING TYPE | BEARING | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION | | BODY STYLE | RECTANGULAR | | BODY LENGTH | 0.130 INCHES MINIMUM AND | | 0.170 INCHES MAXIMUM | | BODY WIDTH | 0.300 INCHES NOMINAL | | BODY HEIGHT | 0.360 INCHES MINIMUM AND | | 0.390 INCHES MAXIMUM | | ACTUATOR TYPE | FLUSH DRIVE WITH SLOT-HOLE | | MOUNTING METHOD | TERMINAL | | FEATURES PROVIDED | HUMIDITY PROOF | | TERMINAL TYPE AND QUANTITY | 3 PIN | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.190 INCHES MINIMUM AND | | 0.210 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.090 INCHES MINIMUM AND | | 0.110 INCHES MAXIMUM | | TERMINAL LENGTH | 0.187 INCHES MINIMUM | | TERMINAL LOCATION | REAR END | | RELIABILITY INDICATOR | NOT ESTABLISHED | | CUBIC MEASURE | 0.017 CUBIC INCHES | | FRAGILITY FACTOR | MODERATELY RUGGED |
|
|