|
|
|
National Stock Number:
5905-01-170-0419
Federal Supply Class:
5905
National Item Identification Number:
011700419
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 6154W11-004 | 97424 | AMETEK INC | | AD1831QD100K | 24355 | ANALOG DEVICES, INC. | | HSR4200-1003-02 | 33256 | SATCON ELECTRONICS CUSTOM HYBRID PRODUCTS DIV | | TDP16031003FD | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 10.000 KILOHMS EACH RESISTOR | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 | | BODY HEIGHT | 0.125 INCHES NOMINAL | | BODY LENGTH | 0.800 INCHES NOMINAL | | BODY WIDTH | 0.288 INCHES NOMINAL | | CUBIC MEASURE | 0.029 CUBIC INCHES | | IDENTICAL VALUE RESISTOR QUANTITY | 8 EACH RESISTOR | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.125 TOTAL NETWORK | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 EACH RESISTOR | | SCHEMATIC DIAGRAM DESIGNATOR | ISOLATED ARRAY | | STYLE DESIGNATOR | DUAL INLINE | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | +0.0 TO 125.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 | | TERMINAL LENGTH | 0.100 INCHES MINIMUM | | TERMINAL QUANTITY | 16 | | TERMINAL WIDTH | 0.018 INCHES NOMINAL | | TERMINAL TYPE | TAB, SOLDER LUG | | TEST DATA DOCUMENT | 97424-6154W11 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|