|
|
|
National Stock Number:
5905-01-175-5667
Federal Supply Class:
5905
National Item Identification Number:
011755667
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 047009-2 | 89305 | SIMMONDS PRECISION PRODUCTS INC | | 06SF6925 | 25413 | ES BETA, INC | | 58FLI-110 | 08815 | HONEYWELL INTERNATIONAL INC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY LENGTH | 0.660 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FIRST FLAT LENGTH | 0.375 INCHES NOMINAL | | FLAT HEIGHT | 0.066 INCHES NOMINAL | | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 0.6150 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM | | MOUNTING METHOD | SHAFT | | PILOT LENGTH | 0.0630 INCHES NOMINAL | | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.7 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.1243 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM | | SHAFT LENGTH | 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM | | SHAFT STYLE | ROUND, FLATTED | | TERMINAL LOCATION | RIGHT ADJACENT SIDE SINGLE ROW | | TERMINAL TYPE AND QUANTITY | 1 WIRE LEAD | | UNDERCUT DIAMETER | 0.615 INCHES MINIMUM AND 0.625 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
|
|