|
|
|
National Stock Number:
5905-01-176-1504
Federal Supply Class:
5905
National Item Identification Number:
011761504
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| 247AS-C0502-060 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | AF102-2K0000-T29A | 17745 | VISHAY ANGSTROHM PRECISION INC DBA VISHAY ANGSTROHM | | RCK02A2KOHMPORM0.05% | 05347 | ULTRONIX INC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 2.000 KILOHMS | | AMBIENT TEMP AT FULL RATED POWER | 125.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 175.0 | | BODY HEIGHT | 0.115 INCHES MAXIMUM | | BODY LENGTH | 0.302 INCHES NOMINAL | | BODY WIDTH | 0.340 INCHES MAXIMUM | | CUBIC MEASURE | 0.012 CUBIC INCHES | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.300 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -0.050 TO 0.050 | | STYLE DESIGNATOR | TERMINALS ONE EDGE | | SPECIAL FEATURES | SENSITIVE TO ELECTROSTATIC DISCHARGE | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -0.1 TO 4.5 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -4.5 TO 0.5 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | +25.0 TO 125.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 25.0 | | TERMINAL LENGTH | 0.875 INCHES MINIMUM | | TERMINAL TYPE | PIN | | TEST DATA DOCUMENT | 30003-247AS-C0502 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|