| ZERO POWER RESISTANCE | 8.000 KILOHMS |
| ZERO POWER RESISTANCE TOLERANCE IN PERCENT AT REFERENCE TEMP | -10.0 TO 10.0 |
| INCLOSURE TYPE | ENCAPSULATED |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| STYLE DESIGNATOR | DISK |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| MAXIMUM POWER DISSIPATION RATING | 350.00 MILLIWATTS |
| AMBIENT TEMP AT FULL RATED POWER | 25.0 DEG CELSIUS |
| MAXIMUM OPERATING TEMP | 125.0 DEG CELSIUS |
| THERMAL TIME CONSTANT IN SECONDS | 10.0 |
| POWER DISSIPATION CONSTANT IN MILLIWATTS PER DEG CELSIUS | 3.0 |
| ZERO POWER TEMP COEFFICIENT OF RESISTANCE IN PERCENT PER DEG CELSIUS | -4.40 |
| TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER | -55.0 DEG CELSIUS 1ST RESISTANCE-TEMPERATURE POINT |
| -15.0 DEG CELSIUS 2ND RESISTANCE-TEMPERATURE POINT |
| 0.0 DEG CELSIUS 3RD RESISTANCE-TEMPERATURE POINT |
| 25.0 DEG CELSIUS 4TH RESISTANCE-TEMPERATURE POINT |
| 50.0 DEG CELSIUS 5TH RESISTANCE-TEMPERATURE POINT |
| 75.0 DEG CELSIUS 6TH RESISTANCE-TEMPERATURE POINT |
| 100.0 DEG CELSIUS 7TH RESISTANCE-TEMPERATURE POINT |
| 125.0 DEG CELSIUS 8TH RESISTANCE-TEMPERATURE POINT |
| ZERO POWER RESISTANCE AT SPECIFIED TEMP | 800.0 KILOHMS 1ST RESISTANCE-TEMPERATURE POINT |
| 58.7 KILOHMS 2ND RESISTANCE-TEMPERATURE POINT |
| 26.2 KILOHMS 3RD RESISTANCE-TEMPERATURE POINT |
| 8.0 KILOHMS 4TH RESISTANCE-TEMPERATURE POINT |
| 2.9 KILOHMS 5TH RESISTANCE-TEMPERATURE POINT |
| 1.2 KILOHMS 6TH RESISTANCE-TEMPERATURE POINT |
| 540.0 OHMS 7TH RESISTANCE-TEMPERATURE POINT |
| 270.4 OHMS 8TH RESISTANCE-TEMPERATURE POINT |
| RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT | -20.0 TO 20.0 1ST RESISTANCE-TEMPERATURE POINT |
| -16.7 TO 16.7 2ND RESISTANCE-TEMPERATURE POINT |
| -13.3 TO 13.3 3RD RESISTANCE-TEMPERATURE POINT |
| -10.0 TO 10.0 4TH RESISTANCE-TEMPERATURE POINT |
| -12.5 TO 12.5 5TH RESISTANCE-TEMPERATURE POINT |
| -15.0 TO 15.0 6TH RESISTANCE-TEMPERATURE POINT |
| -17.5 TO 17.5 7TH RESISTANCE-TEMPERATURE POINT |
| -20.0 TO 20.0 8TH RESISTANCE-TEMPERATURE POINT |
| BODY OUTSIDE DIAMETER | 0.150 INCHES MAXIMUM |
| BODY WIDTH | 0.080 INCHES NOMINAL |
| TERMINAL LENGTH | 1.500 INCHES MINIMUM |
| TERMINAL DIAMETER | 0.013 INCHES NOMINAL |
| TEST DATA DOCUMENT | 37695-238283 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |