| ZERO POWER RESISTANCE | 10.000 KILOHMS |
| ZERO POWER RESISTANCE TOLERANCE IN PERCENT AT REFERENCE TEMP | -10.0 TO 10.0 |
| INCLOSURE TYPE | ENCAPSULATED |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| STYLE DESIGNATOR | DISK |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| SURFACE TREATMENT | SOLDER TERMINAL |
| MAXIMUM POWER DISSIPATION RATING | 35.00 MILLIWATTS |
| AMBIENT TEMP AT FULL RATED POWER | 25.0 DEG CELSIUS |
| MAXIMUM OPERATING TEMP | 125.0 DEG CELSIUS |
| THERMAL TIME CONSTANT IN SECONDS | 10.0 |
| POWER DISSIPATION CONSTANT IN MILLIWATTS PER DEG CELSIUS | 2.0 |
| ZERO POWER TEMP COEFFICIENT OF RESISTANCE IN PERCENT PER DEG CELSIUS | -4.40 |
| TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER | -60.0 DEG CELSIUS 1ST RESISTANCE-TEMPERATURE POINT |
| -50.0 DEG CELSIUS 2ND RESISTANCE-TEMPERATURE POINT |
| -30.0 DEG CELSIUS 3RD RESISTANCE-TEMPERATURE POINT |
| 0.0 DEG CELSIUS 4TH RESISTANCE-TEMPERATURE POINT |
| 50.0 DEG CELSIUS 5TH RESISTANCE-TEMPERATURE POINT |
| 70.0 DEG CELSIUS 6TH RESISTANCE-TEMPERATURE POINT |
| 100.0 DEG CELSIUS 7TH RESISTANCE-TEMPERATURE POINT |
| 125.0 DEG CELSIUS 8TH RESISTANCE-TEMPERATURE POINT |
| ZERO POWER RESISTANCE AT SPECIFIED TEMP | 1.4049 MEGOHMS 1ST RESISTANCE-TEMPERATURE POINT |
| 670.1 KILOHMS 2ND RESISTANCE-TEMPERATURE POINT |
| 177.0 KILOHMS 3RD RESISTANCE-TEMPERATURE POINT |
| 32.65 KILOHMS 4TH RESISTANCE-TEMPERATURE POINT |
| 3.603 KILOHMS 5TH RESISTANCE-TEMPERATURE POINT |
| 1.752 KILOHMS 6TH RESISTANCE-TEMPERATURE POINT |
| 678.3 OHMS 7TH RESISTANCE-TEMPERATURE POINT |
| 341.7 OHMS 8TH RESISTANCE-TEMPERATURE POINT |
| RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT | -16.6 TO 16.0 1ST RESISTANCE-TEMPERATURE POINT |
| -15.6 TO 15.6 2ND RESISTANCE-TEMPERATURE POINT |
| -13.8 TO 13.8 3RD RESISTANCE-TEMPERATURE POINT |
| -11.5 TO 11.5 4TH RESISTANCE-TEMPERATURE POINT |
| -11.5 TO 11.5 5TH RESISTANCE-TEMPERATURE POINT |
| -12.5 TO 12.5 6TH RESISTANCE-TEMPERATURE POINT |
| -13.8 TO 13.8 7TH RESISTANCE-TEMPERATURE POINT |
| -14.7 TO 14.7 8TH RESISTANCE-TEMPERATURE POINT |
| BODY OUTSIDE DIAMETER | 0.095 INCHES MAXIMUM |
| BODY WIDTH | 0.060 INCHES NOMINAL |
| TERMINAL LENGTH | 1.500 INCHES MINIMUM |
| TERMINAL DIAMETER | 0.008 INCHES NOMINAL |
| TEST DATA DOCUMENT | 06845-4051319 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| REFERENCE TEMP IN DEG CELSIUS | 25.0 |