|
|
|
National Stock Number:
5905-01-186-4524
Federal Supply Class:
5905
National Item Identification Number:
011864524
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 228115-2 | 12697 | CLAROSTAT SENSORS AND CONTROLS | | 228115-2 | 37695 | RAYTHEON COMPANY | | CM43842-2 | 12697 | CLAROSTAT SENSORS AND CONTROLS |
|
Techincal Specification:
| ACTUATOR TYPE | SINGLE SHAFT | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION | | BODY DIAMETER | 0.625 INCHES NOMINAL | | BODY LENGTH | 0.657 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 266.0 MINIMUM AND 338.0 MAXIMUM | | ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS SINGLE SECTION | | FEATURES PROVIDED | PANEL SEAL AND SWITCH | | FIRST FLAT LENGTH | 0.160 INCHES NOMINAL | | FLAT HEIGHT | 0.109 INCHES NOMINAL | | FRAGILITY FACTOR | MODERATELY RUGGED | | MAXIMUM RUNNING TORQUE | 21.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 21.00 INCH-OUNCES | | MAXIMUM STOP TORQUE | 56.00 INCH-OUNCES | | MOUNTING BUSHING LENGTH | 0.200 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE RADIUS | 0.313 INCHES NOMINAL | | OPERATING POSITION | START OF ROTATION | | OVERALL DIAMETER | 1.120 INCHES NOMINAL | | OVERALL LENGTH | 1.300 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -3.0 TO 0.0 -55 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 -25 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 25 DEG CELSIUS SINGLE SECTION AND +0.0 TO 3.0 120 DEG CELSIUS SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 266.0 MINIMUM AND 338.0 MAXIMUM | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT LENGTH | 0.440 INCHES NOMINAL | | SHAFT BEARING TYPE | SLEEVE | | SHAFT DIAMETER | 0.125 INCHES NOMINAL | | SHAFT STYLE | ROUND, FLATTED | | SWITCH TYPE | ROTARY | | SWITCH VOLTAGE RATING IN VOLTS | 28.0 | | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED | | SWITCH CURRENT TYPE AND RATING IN AMPS | 3.000 AC | | TERMINAL LOCATION | REAR-BOTTOM | | TERMINAL TYPE AND QUANTITY | 5 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 37695-228115 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|