|
|
|
National Stock Number:
5905-01-187-6045
Federal Supply Class:
5905
National Item Identification Number:
011876045
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 5905PL0646965 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | C10572-3-501C | 35627 | PRECISION ELECTRONICS CORPORATION | | G8744 | 01121 | ROCKWELL AUTOMATION, INC. | | S2276 | 0ASL1 | PRECISION ELECTRONICS COMPANY, INC. | | G8744 | 12697 | CLAROSTAT SENSORS AND CONTROLS | | C10572-3-501C | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| ACTUATOR TYPE | SINGLE SHAFT | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION | | BODY DIAMETER | 0.500 INCHES NOMINAL | | BODY LENGTH | 0.688 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | DEVICE DESIGN TYPE | NONTURN AT 4 OCLOCK | | DEVICE DESIGN TYPE | NONTURN AT 10 OCLOCK | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 270.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 500.000 OHMS SINGLE SECTION | | FIRST FLAT LENGTH | 0.312 INCHES NOMINAL | | FLAT HEIGHT | 0.094 INCHES NOMINAL | | FRAGILITY FACTOR | MODERATELY RUGGED | | MAXIMUM RUNNING TORQUE | 3.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 3.00 INCH-OUNCES | | MAXIMUM STOP TORQUE | 64.00 INCH-OUNCES | | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE RADIUS | 0.245 INCHES NOMINAL | | OVERALL DIAMETER | 0.516 INCHES MAXIMUM | | OVERALL LENGTH | 1.462 INCHES MAXIMUM | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.250 FREE AIR SINGLE SECTION | | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | +0.0 TO 5.6 -55 DEG CELSIUS SINGLE SECTION AND +0.0 TO 3.1 -25 DEG CELSIUS SINGLE SECTION AND +0.0 TO 1.8 0 DEG CELSIUS SINGLE SECTION AND -1.8 TO 1.8 85 DEG CELSIUS SINGLE SECTION AND +0.0 TO 4.4 85 DEG CELSIUS SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 295.0 NOMINAL | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT LENGTH | 0.750 INCHES NOMINAL | | SHAFT BEARING TYPE | BEARING | | SHAFT DIAMETER | 0.125 INCHES NOMINAL | | SHAFT STYLE | ROUND, FLATTED | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 81755-C10572 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|