|
|
|
National Stock Number:
5905-01-192-9958
Federal Supply Class:
5905
National Item Identification Number:
011929958
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 75B610063-101 | 76301 | THE BOEING COMPANY | | 76372 | 04454 | SENSOR SYSTEMS, L.L.C. | | 76372 | 10112 | GENERAL DYNAMICS MOTION CONTROL LLC |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 52.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 1.000 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 135.0 SINGLE SECTION | | BEARING TYPE | BALL SHAFT | | BODY DIAMETER | 2.850 INCHES MAXIMUM | | BODY LENGTH | 1.508 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 SINGLE SECTION | | LATERAL RUNOUT | 0.002 INCHES | | OVERALL DIAMETER | 2.850 INCHES NOMINAL | | OVERALL LENGTH | 1.250 INCHES MAXIMUM | | MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES | | MOUNTING FACILITY QUANTITY | 3 | | MOUNTING HOLE DIAMETER | 0.196 INCHES MINIMUM | | MOUNTING METHOD | UNTHREADED HOLE | | PILOT DIAMETER RUNOUT | 0.00100 INCHES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -15.0 TO 15.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 60.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.2495 INCHES MINIMUM AND 0.2498 INCHES MAXIMUM | | SHAFT LENGTH | 0.680 INCHES NOMINAL | | SHAFT RUNOUT | 0.001 INCHES | | SHAFT STYLE | ROUND | | SPECIAL FEATURES | FOURTH LEAD CASE GROUND; CONNECTOR PART NUMBER MS27467T9B35P ATTACHED TO LEADS | | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD | | TEST DATA DOCUMENT | 76301-75B610063 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|