|
|
|
National Stock Number:
5905-01-194-1491
Federal Supply Class:
5905
National Item Identification Number:
011941491
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 01-P01382L001 | 1VPW8 | GENERAL DYNAMICS MISSION SYSTEMS, INC. | | 01-P01382L001 | 94990 | MOTOROLA INC. DBA INTEGRATED INFORMATION SYSTEMS GROUP |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 21.500 KILOHMS LOWEST RESISTANCE VALUE | | ELECTRICAL RESISTANCE | 6.270 MEGOHMS HIGHEST RESISTANCE VALUE | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 | | BODY HEIGHT | 0.800 INCHES NOMINAL | | BODY LENGTH | 1.250 INCHES NOMINAL | | BODY WIDTH | 0.750 INCHES NOMINAL | | IDENTICAL VALUE RESISTOR QUANTITY | 1 HIGHEST RESISTANCE VALUE | | IDENTICAL VALUE RESISTOR QUANTITY | 1 LOWEST RESISTANCE VALUE | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 9.750 TOTAL NETWORK | | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.001 | | RELIABILITY INDICATOR | ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 LOWEST RESISTANCE VALUE | | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 HIGHEST RESISTANCE VALUE | | SCHEMATIC DIAGRAM DESIGNATOR | SERIES NETWORK | | STYLE DESIGNATOR | SINGLE INLINE | | TERMINAL LENGTH | 4.000 INCHES MINIMUM | | TERMINAL QUANTITY | 3 | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 57761-01-+01382L DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|