|
|
|
National Stock Number:
5905-01-195-5513
Federal Supply Class:
5905
National Item Identification Number:
011955513
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 0N312812-5 | 98230 | NATIONAL SECURITY AGENCY | | LS3604 | 58756 | CTS CORP ELECTROMECHANICAL DIV | | LS3604 | 71450 | CTS CORP |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 50.0 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 0.609 INCHES MINIMUM AND 0.639 INCHES MAXIMUM | | BODY LENGTH | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | CRITICALITY CODE JUSTIFICATION | FEAT | | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | SPECIAL FEATURES | 90 PERCENT CHANGE IN TOTAL RESISTANCE FOR A 50 PERCENT CLOCKWISE ROTATION,LOW END HOPOFFS OF 1000 OHMS | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -30.0 TO 30.0 SINGLE SECTION | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM | | SHAFT LENGTH | 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM | | SHAFT STYLE | ROUND | | SPECIFICATION/STANDARD DATA | 98230-0N312812 MANUFACTURERS SPECIFICATION CONTROL | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
|
|