|
|
|
National Stock Number:
5905-01-197-2517
Federal Supply Class:
5905
National Item Identification Number:
011972517
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 300918-2 | 18612 | VISHAY INTERTECHNOLOGY, INC. | | A600A156-102 | 88818 | KEARFOTT CORPORATION |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 2.180 KILOHMS HIGHEST RESISTANCE VALUE | | ELECTRICAL RESISTANCE | 1.330 KILOHMS LOWEST RESISTANCE VALUE | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 85.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 | | BODY HEIGHT | 0.320 INCHES NOMINAL | | BODY LENGTH | 0.295 INCHES NOMINAL | | BODY WIDTH | 0.100 INCHES NOMINAL | | CUBIC MEASURE | 0.009 CUBIC INCHES | | IDENTICAL VALUE RESISTOR QUANTITY | 1 HIGHEST RESISTANCE VALUE | | IDENTICAL VALUE RESISTOR QUANTITY | 1 LOWEST RESISTANCE VALUE | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.200 TOTAL NETWORK | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -0.100 TO 0.100 EACH RESISTOR | | SCHEMATIC DIAGRAM DESIGNATOR | SERIES NETWORK | | STYLE DESIGNATOR | SINGLE INLINE | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -5.0 TO 5.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 | | TERMINAL LENGTH | 0.750 INCHES MINIMUM | | TERMINAL QUANTITY | 3 | | TERMINAL TYPE | PIN | | TEST DATA DOCUMENT | 88818-A600A156 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNPACKAGED UNIT WEIGHT | 0.600 GRAMS |
|
|