|
|
|
National Stock Number:
5905-01-200-9313
Federal Supply Class:
5905
National Item Identification Number:
012009313
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| MIL-PRF-12934/31 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-R-12934/31 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RR4000C2A9G103 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 SINGLE SECTION | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 SINGLE SECTION | | SHAFT RUNOUT | 0.002 INCHES | | LATERAL RUNOUT | 0.002 INCHES | | PILOT DIAMETER RUNOUT | 0.001 INCHES | | SHAFT RADIAL PLAY | 0.002 INCHES | | SHAFT BEARING TYPE | SLEEVE | | SHAFT END PLAY | 0.00500 INCHES | | MAXIMUM STOP TORQUE | 48.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 0.70 INCH-OUNCES | | MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO 30.0 SINGLE SECTION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | BODY DIAMETER | 0.875 INCHES NOMINAL | | BODY LENGTH | 1.500 INCHES MAXIMUM | | MOUNTING BUSHING LENGTH | 0.313 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT DIAMETER | 0.125 INCHES NOMINAL | | SHAFT LENGTH | 0.625 INCHES NOMINAL | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 MINIMUM | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 MINIMUM | | NONTURN DEVICE LOCATION | AT 12 OCLOCK | | NONTURN DEVICE RADIUS | 0.302 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 81349-MIL-R-12934 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIFICATION/STANDARD DATA | 81349-MIL-R-12934/31 GOVERNMENT SPECIFICATION | | OVERALL LENGTH | 2.125 INCHES MAXIMUM | | OVERALL DIAMETER | 1.250 INCHES MAXIMUM | | FRAGILITY FACTOR | MODERATELY RUGGED | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81349 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-PRF-12934/31 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | RR4000C2A9G103 |
|
|